Single Chamber Feeding Cake Washing Filter Press with Air Blowing
Product Advantage
1, the sealing effect is good.
2. Loading and unloading filter cloth is convenient and safe.
3, reduce the water content, blowing 100% through the filter cake, no wind leakage phenomenon (copper concentrate, gold concentrate and other colored concentrate filter cake moisture content is less than 8%, in other industries under the same conditions, the water content decreased by 6% - 12%), the filter cake automatically falls off, reducing the overall operating costs.
4, the feed is even, there will be no uneven thickness of the filter cake.
5, washing thoroughly and thoroughly, can save 30% -50% of water.
6. The backflushing pipeline and the feeding pipeline are clean without residual slurry, and the service life of the backflushing valve is more than doubled.
7. Compared with the filter plate of the same type, the filtration area is increased by 13%.
Filter Plate and Filter Cloth
Applications
1. Gold Smelter
For high sulfur gold concentrate
Two sets of 2000 type 700 square single chamber feed filter presses were used, each cycle was 40 minutes, and the filter cake moisture was 8-9%.
2. For low sulfur gold tailings
Three sets of 2000 type 700 square single chamber feed filter presses were used, each cycle was 50 minutes, and the filter cake moisture was 15-16%.
3,Used for gold tailings burning sulfur red slag
A 2000 type 500 square single chamber feed filter press is used, each cycle is 50 minutes, and the filter cake moisture is 15-16%.
Flow chart
Our service
1. supply the free material testing in laboratory and give out the report for free.
2. supply free model selection according to your capacity and other information.
3. supply manual operation to insturct the operation.
4. supply installation instruction.
5. supply full set of filtration solution . We have top pump , valve , motor agreement supplier , can give you turnkey service.
FAQ:
1. How to buy your interested products?
You can provide us the water sources, water quality, flow rate and ground area, material requirements about your project (More details, please contact us).
2. How to pay?
L/C or T/T are acceptable.
3. What is the delivery time?
It depends on order quantities. Generally speaking, the delivery time will be within 2 months.
4. How to pack the products?
We use standard export package. If you have special package requirements, we will pack as you required, but the fees will be paid by customers.
5. How to install after the equipment arriving destination?
We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you.
6. How long is the validity?
The validity is 12 months after installation.
Audited Supplier 
){kind=link}
){kind=link}